The aluminum veneer curtain wall uses high-quality high-strength aluminum alloy plates, with common thicknesses of 1.5, 2.0, 2.5, and 3.0MM, model 3003, and state H24. The maximum size of conventional materials is 1220MM×2440MM. Its structure is mainly composed of panels, reinforcement ribs, and corners. The corners can be directly bent and stamped by the panels, or they can be riveted on the small edges of the panels. The reinforcement ribs are connected to the electric welding screws behind the panel surface to make it a solid whole, which greatly enhances the strength and rigidity of the aluminum veneer curtain wall and ensures the flatness and wind and earthquake resistance in long-term use. If sound insulation and heat preservation are required, efficient sound insulation and heat preservation materials can be installed on the inside of the aluminum plate.
The surface of the aluminum veneer curtain wall is generally treated with chromization and other pre-treatments, and then fluorocarbon spraying. Polyvinylidene fluoride resin (KANAR500) for fluorocarbon coating topcoat and varnish. It is generally divided into two coatings, three coatings, or four coatings. Fluorocarbon coatings are corrosion-resistant and weather-resistant. They can resist acid rain, salt spray and various air pollutants, have good cold and heat resistance, can withstand strong ultraviolet radiation, can remain non-fading and non-powdering for a long time, and have a long service life. Our factory uses high-quality fluorocarbon coatings from world-renowned fluorocarbon coating manufacturers such as PPG, DNT, AKZO, NIPPON, etc., with a wide range of color options. Customers can directly select according to the color palette provided by the manufacturer or provide color palette samples.

Aluminum single panel curtain walls are suitable for the decoration of various building interior and exterior walls, lobby facades, column decorations, elevated corridors, pedestrian bridges, elevator edging, balcony packaging, advertising signs, indoor special-shaped ceilings, etc. Building exterior walls, beams, columns, balconies, canopies, airports, stations, hospital conference halls, opera houses, stadiums, reception halls, etc. High-rise buildings